Omega Engineering OS1592 User Manual

OS1592Infrared Fiber OpticThermometer/TransmitterMADE INomega.com e-mail: [email protected] latest product manuals:omegamanual.infoShop online atUser

The Emissivity setting as well as the temperature Engineering unit (°F or °C) arestored in the non-volatile memory. Removing the main power will not e

0-5VDC: Measured Temp = [(Voltage Output ) x (T2 - T1)]+ T150-10VDC: Measured Temp = [(Voltage Output) x (T2 - T1)]+ T110Where, T1 is the minimum te

Figure 5 - Optical Lens Assembly (L1) .25" @ 8" FOVFigure 6 - Optical Lens Assembly (L1) .19" @ 20" FOVFigure 7 - Optical Lens Ass

Figure 9 - Polymer Bolt Assembly (L3) with 90° Angle Air Purge FittingFigure 10 - Optical Head, Mounting Bracket OS1592-MBFigure 11 - Air Purge Collar

SPECIFICATIONSTemperature RangeR1 260 to 538°C (500 to 1000°F)R2 538 to 1093°C (1000 to 2000°F)R3 1093 to 2482°C (2000 to 4500°F)Accuracy at 22°C (

Display Backlit LCD dual displayKeypad switch 4 position, tactile feed back membrane Electrical Isolation Between Input supply and Analog outputs, 10

OS1592 Infrared Fiber Optic Thermometer/Transmitter511MAINTENANCERoutine maintenance is not required except for periodic re-calibration,occasional ins

OS1592 Infrared Fiber Optic Thermometer/Transmitter Addendum12Safety Warnings and IEC SymbolsThis device is marked with international safety and hazar

M3672/0905Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course!Shop online at omega.comTEMPERATURE䡺⻬Thermocouple, RT

Servicing North America:U.S.A.: One Omega Drive, P.O. Box 4047ISO 9001 Certified Stamford, CT 06907-0047TEL: (203) 359-1660 FAX: (203) 359-7700e-mail:

WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for aperiod of 25 months from date of

TABLE OF CONTENTSSECTION ...PAGESection 1 Introduction ...

TABLE OF FIGURESFIGURE ...PAGE1 OS1592 Main Unit ...

INTRODUCTIONThe new OS1592 series Infrared Fiber Optic Thermometer/Transmitterprovides non-contact temperature measurement for industrialapplications.

The following describes the ordering information:The unit provides two separate analog outputs. The first is 1mV/Deg(Standard). The second analog outp

2.2 – Electrical ConnectionAttach the optical assembly to the optical adapter located on the side ofthe housing. Refer to Fig. 1 for the overall appea

OPERATIONTable 1 shows all the display modes of the model OS1592, as well as allthe functions of the membrane keypad. Fig 3 shows the Visual Functiona