Omega-engineering DIGITAL INPUT/OUTPUT PCI-DIO96 User Manual download pdf (Page 13)

INTE Interrupt enable (local):

0 = disabled, 1 = enabled (default)

INTPOL Interrupt polarity:

0 = active low (default), 1 = active high

INT Interrupt status:

0 = interrupt not active, 1 = interrupt active

PCINT PCI interrupt enable:

0 = disabled (default), 1 = enabled

LEVEL/EDGE Interrupt trigger control:

0 = level triggered mode (default), 1 = edge triggered mode

INTCLR Interrupt clear (edge triggered mode only):

0 = N/A, 1 = clear interrupt

ISAMD ISA mode enable control (must be set to 1)

0 = ISA mode disabled, 1 = ISA mode enabled (default)

5.3 BADR2

BADR2 is not used.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

No comments

Omega-engineering DIGITAL INPUT/OUTPUT PCI-DIO96 User Manual Page 13