Omega-engineering OMEGASCOPE OS533 User Manual download pdf (Page 23)

Using the Handheld Infrared Thermometer

2-8

Figure 2-11 Recorder Hookup

• Moving Surface Scan - Measures the Temperature of Points on a

Moving Surface:

1. Mount the thermometer on a camera tripod and aim at a fixed

point on the moving surface.

2. Pull the trigger and press the key to lock the trigger.

3. If necessary, adjust the emissivity. The thermometer is now set

up for measuring the temperature of a moving surface.

4. To record the temperature profile of the moving surface,

connect the IR thermometer to a strip chart recorder. Refer to

Figure 2-11 for details.

5. After all data is taken, press the key to unlock the trigger.

• Fixed Point Monitoring Over Time - Monitors the temperature at

a fixed point over time:

It is recommended that you use the ac adapter for long

term measurement of temperature.

1. Mount the thermometer on a camera tripod and aim at the

target.

2. Connect the analog output of the thermometer to a strip chart

recorder as shown in Figure 2-11.

3. Pull the trigger and press the key to lock the trigger.

4. If necessary, adjust the emissivity.

5. The thermometer is now set up for unattended monitoring of

temperature over time. You can also download the temperature

to a Serial Printer or a PC for further analysis (Models OS533,

OS534, OS523, OS524).

6. After all data is taken, press the key to unlock the trigger.

To Strip Chart

Recorder

Analog

Cable

NOTE

Center hole is the

analog output jack

NOTE

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

No comments

Omega-engineering OMEGASCOPE OS533 User Manual Page 23